Here we discuss in detail about how to use a car polisher in NZ. A professional can polish your car better than it did when you purchased it. There are a few issues with car polishing. These include paint runs, dirt nibs, sags, and general polishing.
Image Source: Google
To ensure a clean car, dry the finish according to the instructions on the product sheet. Failure to do so could cause damage to the finish and make the job more expensive. It is important to keep your eyes on the task and stick to the measurements.
Polishing the right way: Make sure that you only use a polish that is approved for urethane finish and not lacquer finishes. You should also use finer 1000 grit paper when sanding. Using coarse grit sandpaper could cause damage to the finish. To get the best results when polishing, set your polisher seed between 1200 and 1700 rpm. You can also ensure that you use the correct type of pad to get great results.
Just like with polishing, make sure you check the correct manufacturer's product data sheet before starting sanding or polishing. This will help you determine the dry times recommended before polishing.
It is essential that you do the necessary prep work to ensure that the surface is free from imperfections such as dirt nibs. These imperfections can be removed by wet sanding with 1500 grit or higher. You can even search online for more information about car polishers in NZ.